Passap E 8000, Руководство по эксплуатации

Страница: 19 / 266

The thread ing up
1
The yam table
Behind the machine is a table on which the yarn
cones may be placed. This table has 1 5 eyelets
that serve as further yarn guides when the cones
are to be placed on the floor. Especially when
two or three thin yarns are to be knitted toge
th e r ,
it is recommended to lead each yarn through a
separate eyelet.
2 The guiding eyelet 2
Guide the yarn that comes from the cone through
this eyelet. If you are knitting two or more yarns
through one feeder s i mult a neo u s l y , all yarns
must come together and be led through th1s
eyelet
3 The guiding eyelet 3
The yarn must be threaded through th1s gu1d1ng
eyelet from be
l ow .
4 T he yam tension discs
Lead the yarn between the two tension d1scs by
pulling the outer disc away slightly
Ensure that the yarn lies under the tappet that
protrudes be h i n d . This prevents the yarn from
jumping out of the tension discs
5
T
he guiding eyelet 5
Guide the yarn through this eyelet
Do not at this point guide the yarn through eyelet
6; do this at the very end when the yarn has
been f
a ste n ed . This prevents the tensioning arm
from accidentally pulling the yarn back
7
The guiding eyelet
7
Now guide the yarn through this e y e l e t .
Then lead the yarn through the feede r . Please
refer to page 20.
17