Passap E 8000 Скачать руководство пользователя

Страница: 22 / 266

The color changer

Press the first black key corresponding to the

first feeder from the left right down until it clicks

into place.

Press the main lever down until the first feeder

support from the left swings up.

Remove the feeder from its support and thread it

with the yarn coming from the first tension arm
from the left.

Fit the feeder into its support again, holding the

yarn at the same time.

Note: replace feeder into its support with its two
rings between the two clamps.

Press the feeder down. Guide the end of the yarn

down between the needle beds and fasten

it.

Thread the yam through feeder 2, 3 and 4 in
the same manner.

Finally, press discharge flap, the AUTOCOLOR

is now in Neutral Position. The discharge flap is

underneath the AUTOCOLOR to the back of the

small rectangular box.

Содержание E 8000











































































































































































































































































Результаты поиска

Содержание E 8000

Отзывы:

Похожие инструкции для E 8000

Бренды по названию

Популярные бренды

Passap E 8000, Руководство по эксплуатации

Результаты поиска

Содержание E 8000

Отзывы:

Похожие инструкции для E 8000

Бренды по названию

Популярные бренды