Passap E 8000, Руководство по эксплуатации

Страница: 149 / 266

Error messages
1 1 73, 2 1 73
1 1 9 1 , 2 1 9 1
1 1 92, 2 1 92
1 206, 2206
2 1 73
2 1 9 1
2 1 92
2206
WRONG CAM BOX POSITION
This appears when you have changed the knitting width
and the cam box is now in a position on the needle bed,
where you want to knit.
After ENT push the cam box to the ST A RTPOSITION .
POSITION ERROR
In this case the cam box has lost its position in relation to
the needle bed.
Make sure that there is no lint in the slotted rail or
somewhere on the underside of the lock.
This message can also appear when you have moved the
cam box too quickly by hand.
If after cleaning it reappears, it might indicate that the
electronic of the lock is defective. In that case call your
next service center.
START POSITION WRONG
You have acknowledged the START POSITION at a
moment when the cam box was not in the start position
Move the cam box to the start position and start aga i n .
WRONG DIRECTION
You have moved the cam box in the direction which is not
the one that appears on the display.
If you want to move the cam box in the opposite direction
to the one indicated, always first press the key "opposite
direction". (See page 26)
After this message you have to move the cam box to the
START POSITION.
see 1 1 73
see 1 1 91
see 1 1 92
see 1 206
1 47