Passap E 8000, Руководство по эксплуатации

Страница: 49 / 266

Sta rting the kn itting machine
In general, at this point you will choose among the following
three possibilities:
ENT
1 . You wish to continue your piece of
knitting at the poi nt where you have
switched off the machine.
If this is the case, press ENT. The knitting instructions
following now are described on the following page.
2. You wish to start at row zero a piece of
knitting which you have already
programmed.
.
In this case enter a zero at the first input point, then press
E N T . The instructions relating to starting a new piece of
knitting at the zero row will appear.
3. You wish to program a sector or even
an entire piece of knitti ng.
Also in this case enter a zero at the first input point and then
press ENT.
When the next display appears, you can press the " ProgS"
key which allows you to reprogram one or several pattern
secto
r s .
(In principle it is possible to press the "ProgS" key at this
point. If you do this, enter zero first in any case. Otherwise
the operating unit will always calculate the pattern up to the
number of rows indicated here, and this takes time
depending on the pattern and the number of rows).
47