81
Midi Port Address
This item sets the I/O address for the Midi function.
Midi Port IRQ
This item sets the interrupt request for the Midi function.
Onboard Serial Port 3
This option is used to assign the I/O address for the onboard serial port 3
(COM3), which is used for the rear customer display. The default setting
is 3E8H.
Serial Port 3 Use IRQ
This option is used to assign the interrupt request (IRQ) for the onboard
serial port 3 (COM3). The default setting is IRQ 10.
Onboard Serial Port 4
This option is used to assign the I/O address for the onboard serial port 4
(COM4). The default setting is 2E8H.
Serial Port 4 Use IRQ
This option is used to assign the interrupt request (IRQ) for the onboard
serial port 4 (COM4). The default setting is IRQ 7.
Serial Port 4 Mode
Sets the mode when serial port 4 is used for IR communication. The
default setting is Standard.
IR Duplex Mode
This field is available when Serial Port 4 Mode is set to either ASKIR or
IrDA. This item enables you to determine the infrared (IR) function of the
onboard infrared chip. The default setting is Half.
Full-duplex means that you can transmit and send information
simultaneously. Half-duplex is the transmission of data in both directions,
but only one direction at a time.
User IR Pins
Consult your IR peripheral documentation to select the correct setting of
the TxD and RxD signals.
Press <Esc> to return to the main screen.
Содержание PT-9000
