Partner PT-9000, Руководство пользователя

Страница: 85 / 115

75
Delayed Transaction
The chipset has an embedded 32-bit posted write buffer to support delay
transactions cycles. Enable this item to support compliance with PCI
specification version 2.1. The default setting is Enabled.
AGP Graphics Aperture Size
This item defines the size of the aperture if you use an AGP graphics
adapter. The AGP aperture refers to a section of the PCI memory address
range used for graphics memory. We recommend that you leave this item
at the default setting. The default setting is 64.
Display Cache Frequency
This item enables you to set the display cache frequency. We recommend
that you leave this item at the default value (100 MHz).
System Memory Frequency
This item enables you to set the frequency of the system memory, either
100 or 133 MHz, or automatically selected. We recommend that you
leave this item at the default value (Auto).
On-Chip Video Window Size
This item defines the size of the aperture if you use an AGP graphics
adapter. It refers to a section of the PCI memory address range used for
graphics memory. We recommend that you leave this item at the default
value (64MB).
*Onboard Display Cache Setting*
The items under this heading are used to set the parameters for display
cache memory that may be optionally installed on your mainboard. If you
have display cache memory, we recommend that you leave these items at
the default settings.
CAS# Latency Default
This item sets a timing parameter for the Column Address Strobe memory
access. Leave this item at the default setting.
Paging Mode Control
This item allows you to enable and disable page open mode. If set to
Open, the GMCH memory controller tends to leave the page open.