Partner PT-9000, Руководство пользователя

Страница: 90 / 115

錯誤
!
尚未定義樣式。
80
UR2 Duplex Mode
This field is available when UART 2 Mode is set to either ASKIR or
IrDA. This item enables you to determine the infrared (IR) function of the
onboard infrared chip. The default setting is Half.
Full-duplex means that you can transmit and send information
simultaneously. Half-duplex is the transmission of data in both directions,
but only one direction at a time.
User IR Pins
Consult your IR peripheral documentation to select the correct setting of
the TxD and RxD signals.
Onboard Parallel Port
This option is used to assign the I/O address and IRQ for the onboard
parallel port. The default setting is 378/IRQ7.
Parallel Port Mode
Enables you to set the data transfer protocol for the parallel port. There
are four options: SPP (Standard Parallel Port), EPP (Enhanced Parallel
Port), ECP (Extended Capabilities Port) and ECP+EPP. The default
setting is ECP+EPP.
SPP allows data output only. Extended Capabilities Port (ECP) and Enhanced
Parallel Port (EPP) are bi-directional mo des, allowing both data input and
output. ECP and EPP modes are only supported with EPP- and ECP-aware
peripherals.
ECP Mode Select
Sets the ECP mode version. The default setting is EPP1.7.
ECP Mode Use DMA
When the onboard parallel port is set to ECP mode, the parallel port can
use DMA 3 or DMA 1. The default setting is 3.
PWRON After PWR-Fail
This item enables your computer to automatically restart or return to its
last operating status after power returns from a power failure.
Game Port Address
This item sets the I/O address for the game port.