Parkside PTK 2000 E3, Перевод оригинальной инструкции

Страница: 8 / 40

GB IE
8
NI
18
30 Slot in the riving knife
19
31 Screw with knurled nut and wing nut
26
32 Cam lever
33 Groove
34 Knurled screw
31
35 Laser
36 Laser switch
32
37 Screw for battery compartment
38 Battery cover
37
39 Stop rail
40 Transverse stop
Functional description
The table circular saw is used for cutting all types of wood lengt
-
hwise and crosswise (only with the transverse stop), depending
on the machine size. All types of round timbers must not be cut
with it.
Technical data
Bench circular saw............................................................... PTK 2000 E3
AC motor ......................................................... 230 V~ 50Hz
Power
...................................................................2000 Watt
Operating mode ...................................................... S6 40%*
Safety class ..................................................................... II
Protection category
..........................................................
IPX0
Idling speed .......................................................... 4800 min -1
Carbide saw blade (Dimensions to be used)
..........................................................ø 254 x ø 30 x 2.8 mm
Idling speed saw blade, n max. .............................. 7000 min
-1
Number of teeth .........................................................24 / 48
Thickness riving knife
...................................................2.5 mm
min. Workpiece size WxLxH ............................... 10x50x1 mm
Table size
........................................................ 630 x 545 mm
Table size with all three extensions
..................... 880 x 930 mm
Cutting height max. 90° ................................................87 mm
Cutting height max. 45° ................................................63 mm
Height adjustment ...................................................0 - 87 mm
Saw blade, swivelling ...................................................0 - 45°
Extraction connection .................................................ø 34 mm
Weight ............................................................. approx 20 kg
Laser class ...........................................................................2
Laser wavelength ....................................................... 650 nm
Laser power ............................................................. < 1 mW
Laser module power supply
........................................................... 2 x 1.5 V Micro (AAA)
Sound pressure level
(L
pA
) ..................................................
93.7 dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured .........................................
106.7 dB(A); K
WA
= 3 dB
guaranteed .........................................................108 dB(A)
* Operating mode S6 40%: Continuous operation with intermittent load
(cycle time 10 min). In order not to heat the motor more than permitted,
the motor may only be operated for 40% of the cycle time with the stated
nominal power and must then continue running for 60% of the cycle time
without a load.
This appliance is intended to be operated using a mains supply
network with a system impedance (internal resistance of the
mains) Zmax on the transfer point (house connection) of maxi-
mum 0.5367 Ohm. The user must ensure that the appliance is
only operated using a mains supply network meeting the require-
ments. If necessary, local power supply companies can be con-
sulted with regards to the system impedance.
Safety instructions
CAUTION!
The following basic safety precautions must be ob
-
served while using electric tools to protect against electric shock,
injury and risk of fire. Please read all instructions before using
this electric tool and keep the safety instructions in a safe place.
Symbols and icons
Symbols on the appliance:
Carefully read these Operating Instructions.
Wear eye protection.
Wear ear protection.
Wear breathing protection.
Caution - Risk of injury.
Never reach into the running blade.
Do not expose the unit to rain. The device must not be
wet, nor should it be operated in a moist environment .
Caution! - Laser radiation. Do not look into the beam.
Laser class 2
This label is attached to the saw blade guard.
108
Information of the acoustic power level L
WA
in dB.
Safety class II (Double Isolated)
Electrical appliances must not be disposed of with the
domestic waste.
Graphical symbol additionally on the saw
blades
Caution - a damaged blade must not be used under any
circumstances. Replace the saw blade immediately.
29