Parkside PTK 2000 E3, Перевод оригинальной инструкции

Страница: 7 / 40

IE NI
7
GB
Caution! When using equipment, certain safety precautions
must be complied with in order to avoid injuries and damage.
You should therefore read these operating instructions / safety
instructions carefully. Keep these in a safe place so that the infor
-
mation is available to you at all times. Should you give the de-
vice to anyone else, please give them these operating instructions
/ safety instructions as well. We assume no liability for accidents
or damage caused by failure to observe these instructions or the
safety instructions. Changes to the machine will cause the ma-
nufacturer‘s liability with respect to any resulting damage to be
completely excluded. Even when the device is used in accordan-
ce with the designated purpose, it is nevertheless not possible to
completely eliminate certain residual risk factors. Due to the de-
sign and structure of the machine, the following risks may occur:
• Touching the saw blade in the area of the saw which is not co
-
vered;
• Reaching into the running saw blade (cuts)
• Kickback of workpieces and workpiece parts.
• Saw blade breaks.
• Ejection of faulty hard metal parts of the saw blade.
• Hearing damage if the necessary hearing protection is not used.
• Emissions of wood dust which are harmful to the health when
used in closed rooms.
Please note that the use of our devices in accordance with the desi
-
gnated purpose does not include commercial, handicraft or industrial
applications. We assume no warranty if the device is used in commer-
cial, handicraft or industrial businesses or for equivalent purposes.
General description
Extent of the delivery
Carefully unpack the appliance and check that it is complete:
- Saw table with pre-assembled
carbide-tipped saw blade with 24 teeth
carbide-tipped saw blade with 48 teeth
(additionally enclosed)
- Blade guard with mounting material
- Riving knife
- Laser
- Batteries 1.5V AAA (2x)
- Guide rail
- Parallel stop
- Stop rail
- Transverse stop
- Table width extender (2x)
- Table length extender
- Push stick
- Legs (4x)
- Central struts, short (2x)
- Central struts, long (2x)
- Rubber feet (4x)
- Stand brackets (2x)
- Table supports, short (4x)
- Table supports, long (2x)
- Collection bag
- Instruction for use
Mounting Material
- A
(b) Carriage bolt, 16 pieces;
(c) Washer, 12 pieces;
(d) Spring washer, 12 pieces;
(e) Nuts, 16 pieces;
(f) Carriage bolt, small with two nuts, 4 pieces
- B
(a) Hexagonal bolt with collar, 20 pieces;
(c) Washer, 12 pieces;
(d) Spring washer, 12 pieces;
(e) Nuts, 12 pieces;
Tools
- (h) Hexagon socket wrench HX 6
- (k) Ring spanner AF 10/22
- (i) Open-ended spanner AF 8/10
Additional tools required
- Phillips screwdriver
The illustrations are on the fold-out pages
.
Overview
1
1 Saw table
2 Saw blade guard
3 Riving knife (not visible)
4 Saw blade (not visible)
5 Table insert
6 Parallel stop
7 Table width extender
8 Cam lever
9 Clamping screw
10 Scale
11 Handwheel
12 Crank handle
13 Base frame
14 On/off switch
15 Collection bag for wood residues
16 Guide rail
17 Table length extender
2
18 Suction adapter
19 Push stick
4
20 Legs (4x)
21 Central struts, short (2x)
22 Central struts, long (2x)
23 Rubber feet (4x)
24 Stand brackets (2x)
7
25 Attachment points
5
26 Table brackets, short
27 Table supports, long
16
28 Countersunk screws of the table insert
17
29 Fixing screws of the riving knife