Parkside PDSS 400 A1, Инструкции по эксплуатации и безопасности

Страница: 10 / 97

10 GB
ous injuries.
„ „
Do not directly inhale exhaust
air. Keep eyes away from ex-
haust air. Exhaust air from the
air tool may contain water, oil,
metal particles or contaminants
from inside the compressor.
This may result in health dam-
age.
„ „
CAREFUL WHEN PUTTING
THE TOOL DOWN! Always
put down the device so the
trigger is not activated. This
could potentially result in ac-
cidental activation of the tool,
which again could result in
hazards.
„ „
Only use suitable accessories.
These can be purchased from
the manufacturer. Using non-
OEM accessories may result in
hazards.
„ „
Only use filtered and regu-
lated compressed air. Dust,
caustic vapours and / or mois-
ture may damage the motor of
an air tool.
„ „
The hose must be con-
structed for a minimum
pressure of 8.6 bar or
125 PSI, but no less than 150
% of the maximum pressure
produced by the system.
„ „
DANGER! Avoid contact with
live lines. This device is not in-
sulated against electric shock.
„ „
Do not modify this equipment
in any way without the manu-
facturer‘s approval.
„ „
Only use the tool at the speci-
fied pressure (max. 6.3 bar).
„ „
Disconnect the tool from the
air supply after each use and
when not in use.
„ „
Discontinue use if the tool is
leaking or in need of repair.
„ „
Never connect the tool to an
air hose with pressure exceed-
ing 6.3 bar.
„ „
Keep your working area clean
and well lit. Untidy or poorly
lit working areas can result in
accidents. Doing so will allow
you better control of the equip-
ment, particularly in unfore-
seen circumstances. Disorder
and unlit work places can lead
to accidents.
„ „
Only have the equip-
ment repaired by qualified
specialist personnel using
OEM spare parts. This will en-
sure your device remains safe
to use.
„ „
Keep children and other indi-
viduals away from the equip-
ment during use. Distractions
can cause you to lose control
of the equipment.
„ „
Wear suitable clothing. Do not
wear loose clothing or jewel-
Safety instructions for air tools