Parkside PDSS 400 A1, Инструкции по эксплуатации и безопасности

Страница: 13 / 97

13 GB
should not be ignored. The
user should consult a qualified
healthcare professional.
z
Risks associated with
accessories
„ „
Disconnect machine from the
power supply before changing
a tool or accessory.
„ „
Do not touch collets or acces-
sories whilst impact driving, as
doing so may increase the risk
of cuts, burns or injuries from
vibration.
„ „
Only use accessory and ma-
terial sizes and types recom-
mended by the manufacturer
for screw joints, do not use
other accessory and material
types and sizes.
„ „
Only use impact sockets in
good working condition as
manual sockets and accesso-
ries in poor working condition
may break and be ejected
when used with impact drivers.
z
Hazards in the work en-
vironment
„ „
Slipping, tripping and falls
are main causes of injuries at
the workplace. Be mindful of
surfaces which may have be-
come slippery during machine
use, and of tripping hazards
caused by the air- or hydraulic
hose.
„ „
Proceed with caution in un-
familiar surroundings. These
may hold hidden dangers due
to electrical cables or supply
lines.
„ „
The machine for screw connec-
tions is not suitable for use in
explosive environments and is
not insulated against contact
with electrical power sources.
„ „
Verify there are no electrical
lines, gas lines, etc. which
may result in a hazard in the
event they are damaged dur-
ing machine use.
z
Hazards due to dust and
vapours
„ „
Dusts and vapours generated
by use of machines for screw
connections may result in dam-
age to the health (e.g. cancer,
birth defects, asthma and / or
dermatitis); it is imperative to
perform a risk assessment for
these hazards and implement
the respective regulatory mech-
anisms.
„ „
The risk assessment should in-
clude dust generated from ma-
chine use and dust in the area
possibly being blown around.
„ „
Exhaust air must be dis-
charged so the amount of dust
Safety instructions for air tools