Parkside PDSS 400 A1, Инструкции по эксплуатации и безопасности

Страница: 11 / 97

11 GB
lery. Keep your hair, clothing
and gloves away from moving
parts. Loose clothing, jewel-
lery or long hair can become
caught in moving parts.
„ „
Put down trigger and equip-
ment in the event of unex-
pected compressor failure.
„ „
Never use or store the tool in
humid, dusty locations or near
water, other fluids or hazard-
ous gases.
„ „
If possible, use a condensate
trap or regularly drain conden-
sate (water) from hoses and
pipes before and during air
tool use.
„ „
Secure work pieces. Use
clamps or a vice to secure the
work piece. Holding the work
piece in your hand or pressing
it against your body will not
allow for safe use of the equip-
ment.
„ „
ATTENTION! An under-
sized com- pressed air
system may reduce the
efficiency of your equip-
ment.
z
Risks due to projecting
parts
„ „
If the work piece, one of the
accessories or the tool itself
breaks, parts may be pro-
jected at great speeds.
„ „
Always wear impact-resistant
eye protection when using the
machine for screw connec-
tions. The level of protection
required should be asses for
each individual application.
„ „
Be sure the work piece is prop-
erly secured.
z
Risks from gripping /
winding
„ „
Risks from gripping / wind-
ing may result in suffocation,
scalping and / or cuts if loose
clothing, jewellery, necklaces,
hair or gloves are not kept
away from the machine and its
accessories.
„ „
Gloves may become tangled
in the rotating drive, which
may result in injuries or frac-
tures in fingers.
„ „
Rotating drives and extensions
may easily catch/ wind rub-
berised or metal reinforced
gloves.
„ „
Never wear loose gloves or
gloves with cut or worn fin-
gers.
„ „
Never hold on to the drive,
collect or the drive extension.
„ „
Keep hands away from the ro-
tating drive.
Safety instructions for air tools