Parkside PBLG 52 A1, Перевод оригинальной инструкции

Страница: 18 / 88

PBLG 52 A1
GB │ IE │
15 ■
Technical specifications
Engine
Displacement 52 cm 3
Max. motor output as per ISO 8893 1.6 kW
Nominal power 1.45 kW
Nominal speed 7500 rpm
Idle speed 3000 rpm
Spark plug L7RTC
Airflow velocity 290 km/h (with flat nozzle)
Volumetric flow 750 m 3 /hr (with flat nozzle)
Volumes
Fuel tank approx. 1300 cm 3 (1.3 l)
Noise and vibration data
Information on the sound power level emitted by the machine, determined
according to the European Directives 2000/14/EC and 2005/88/EC.
Noise measurement value determined in accordance with EN
15503:2009 + A2:2015.
The A-rated noise level is typically as follows:
Sound pressure level L
pA
in dB (A)
97.1 dB
K = 3 dB
Sound power level L
WA,m
in dB (A)
Measured: 109.1 dB
Guaranteed: 111 dB
K = 2 dB
Vibration value A
hv, eq
in m/s 2
ISO 22867
4.016 m/s 2
K = 1.5 m/s 2
Wear ear muffs to prevent hearing damage!
NOTE
► The vibration level specified in these instructions has been measured in
accordance with the standardised measuring procedure specified in
EN 15503 and can be used to make equipment comparisons. The
specified vibration emission value can also be used to make an initial
exposure estimate.
WARNING!
► The vibration level varies in accordance with use and may be higher
than the value specified in these instructions in some cases. There is a
risk of underestimation of the vibration load if the appliance is used
regularly in this manner. To estimate the vibration load during a specific
working period accurately, periods during which the appliance is
switched off (or running, but not being used) must also be taken into
account. This can significantly reduce the vibration load over the total
working period.
WARNING!
► You can reduce the vibration risk, for example, the risk of Raynaud's
phenomenon (circulatory problems), by taking regular breaks during
which you rub your hands together.
The following symbols are used in these original operating
instructions/on the appliance
Read these operating instructions thoroughly before using the
tool for the first time, and retain them for future reference.
Warning! Read the operating instructions before use!
WARNING! Special safety precautions are required when
working with the appliance.
Read and observe all warnings.
Wear ear muffs.
Wear safety goggles.
Wear protective gloves.
Pull the pull start with the choke in this position. When you
pull out the choke, the air flap closes. When you push in the
choke, the air flap opens.
Press the fuel pump (primer) 6x
Fuel tank; mixing ratio: 40 parts petrol to 1 part oil
Petrol: ROZ 95/ROZ 98
2-stroke motor oil: ISO-L-EGD/JASO FD
Open flames and smoking in the vicinity of the appliance
are strictly prohibited!
Guaranteed sound power level of the appliance
The operator of the leaf blower must ensure that people and
animals keep a distance of at least 15 m. If several operators
are working in close proximity to each other, the safety
distance must be at least 15 m.
Caution! Poisonous CO vapours (carbon monoxide vapours)!
Do not use the appliance in closed rooms!
WARNING!
Hair can be sucked into the appliance!
Caution – petrol is highly flammable!
Explosion hazard! Do not spill any fuel!
Turn the appliance off and remove the spark plug connector
before performing any maintenance work!
Attention! Risk of suffocation!
Attention, hot parts. Maintain a safe distance!
Watch out for flung away parts!
Keep others away! Maintain a safe distance!
Do not fill up on E10!
Pour the gasoline mixture in here!