ParkerVision Horizons 1500WR Скачать руководство пользователя

Страница: 36 / 106

Horizons 1500WR Wireless 4-Port Router

ParkerVision

5.3

DHCP Setup

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to

obtain TCP/IP configuration at start-up from a server. You can configure the 1500WR Wireless Router

as a DHCP server or disable it. When configured as a server, the 1500WR Wireless Router provides

the TCP/IP configuration for the clients. If set to

None

, DHCP service will be disabled and you must

have another DHCP server on your LAN, or else the computer must be manually configured.

5.4

Factory LAN Defaults

The LAN parameters of the 1500WR Wireless Router are preset in the factory with the following val-

ues:

• IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)

• DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.

IP Pool Setup

The 1500WR Wireless Router is pre-configured with a pool of 32 IP addresses starting from

192.168.1.33 to 192.168.1.64. This configuration leaves 31 IP addresses (excluding the 1500WR

Wireless Router itself) in the lower range for other server computers, for instance, servers for mail,

FTP, TFTP, web, etc., that you may have.

These parameters should work for the majority of installations. If your ISP gives you explicit DNS

server address(es), read the embedded web Web Configuration Utility help regarding what fields need

to be configured.

5.5 RIP Setup

RIP (Routing Information Protocol, RFC 1058 and RFC 1389) allows a router to exchange routing

information with other routers.

RIP Direction

controls the sending and receiving of RIP packets. When

set to:

Both

- the 1500WR Wireless Router will broadcast its routing table periodically and incorporate the RIP

information that it receives.

In Only

- the 1500WR Wireless Router will not send any RIP packets but will accept all RIP packets received.

Out Only

- the 1500WR Wireless Router will send out RIP packets but will not accept any RIP packets received.

None

- the 1500WR Wireless Router will not send any RIP packets and will ignore any RIP packets received.

RIP Version controls the format and the broadcasting method of the RIP packets that the 1500WR

Wireless Router sends (it recognizes both formats when receiving).

RIP-1

is universally supported; but

RIP-2

carries more information. RIP-1 is probably adequate for most networks, unless you have an

unusual network topology.

Both

RIP-2B

and

RIP-2M

send routing data in

RIP-2

format; the difference being that RIP-2B uses

subnet broadcasting while RIP-2M uses multicasting. Multicasting can reduce the load on non-router

machines since they generally do not listen to the RIP multicast address and so will not receive the

RIP packets. However, if one router uses multicasting, then all routers on your network must use multi-

casting, also.

By default, RIP Direction is set to

Both

and RIP Version to

RIP-1

Содержание Horizons 1500WR











































































































Результаты поиска

Содержание Horizons 1500WR

Отзывы:

Похожие инструкции для Horizons 1500WR

Бренды по названию

Популярные бренды

ParkerVision Horizons 1500WR, Руководство пользователя

Результаты поиска

Содержание Horizons 1500WR

Отзывы:

Похожие инструкции для Horizons 1500WR

Бренды по названию

Популярные бренды