Horizons 1500WR Wireless 4-Port Router
20
ParkerVision
3.3 Wizard Setup: Wireless LAN Setup
Set up your wireless LAN using the second wizard screen.
LABEL
DESCRIPTION
ESSID
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
If you change this field on the 1500WR Wireless Router, make sure all wireless stations use
the same ESSID in order to access the network.
Choose
Channel ID
To manually set the 1500WR Wireless Router to use a channel, select a channel from the
drop-down list box. Open the
Channel Usage Table
screen to make sure the channel is not
already used by another AP or independent peer-to-peer wireless network.
To have the 1500WR Wireless Router automatically select a channel, click
Scan
instead.
Scan
Click this button to have the 1500WR Wireless Router automatically scan for and select a
channel with the least interference.
WEP
Encryption
Select
Disable
allows all wireless computers to communicate with the Wireless Routers
without any data encryption.
Select
64-bit WEP
or
128-bit WEP
to allow data encryption.
ASCII
Select this option in order to enter ASCII characters as the WEP keys.
HEX
Select this option to enter hexadecimal characters as the WEP keys.
The preceding “Ox” is entered automatically. Leave this in front of
your key.
Key 1 to Key 4 used to encrypt data. Both the 1500WR Wireless Router and the wireless stations must use
the same WEP key for data transmission.
If you chose
64-bit WEP,
then enter any 5 ASCII characters or 10 hexadecimal characters
(“0-9”, “A-F”). If you chose
128-bit WEP,
then enter 13 ASCII characters or 26 hexadecimal
characters (“0-9”, “A-F”).
You must configure all four keys, but only one key can be activated at any one time. The
default key is key 1.
Next
Click
Next
to continue.
Back
Click
Back
to return to the previous screen.
Refer to the chapter on wireless LAN for more information.
