Page 5
© 1999 ParkerVision, Inc. • Meet Your 1-CCD Presenter Camera System
Tracking System Keypad
Next, take a look at the front of your Tracking System Keypad. It is the control center for your Presenter Camera System and
contains the following features.
▼
LOCATION PRESET SELECT –
Used
to recall preset locations.
▼
autoTRACK VIEWS –
Used to change
the position and perspective of the
presenter in the video frame while
being tracked by the camera (choose
between Tight, Wide, Right, and
Left)
▼
ZOOM IN/OUT –
Used to tighten
and widen the camera’s view.
▼
TRACKING FREEZE –
Used to disengage
autoTRACK, and freeze the camera’s
movement
.
▼
SETUP –
Used in conjunction with other
controls for advanced functions.
▼
IMAGE CONTROLS –
Used to open and
close the iris.
▼
auto
IMAGE –
Used to allow the camera to
automatically adjust the brightness and
darkness for each video picture.
▼
PAN/TILT –
Used to Controls the
camera’sup/down, and left/right
movement.
Use of the PAN/TILT arrow buttons
will disengage the autoTRACK mode.
▼
Indicator LED –
indicates Keypad is in
operation.
▼
SUBJECT POSITION CONTROLS –
Used
to fine-tune the position of the subject
while in
autoTRACK
mode.
▼
FOCUS –
Used to
manually adjust visual
clarity of the video
picture. Used with
SETUP
button to
increase and decrease
Gain.
▼
autoFOCUS –
Used to
allow the camera to
automatically adjust the
visual clarity of the video
picture.
