Page 21
© 1999 ParkerVision, Inc. • Use Your 1-CCD Presenter Camera System
Using Location Presets
Home Preset
The first Location Preset position is
HOME
. You will use this Preset Location the most.
For example, you may want to program the
HOME
position at a podium or the conference
room table, where most of the speaking is likely to take place. This Preset can be recalled at
any time during a videoconference or videotaping session.
HOME
is also used as a default position while in the tracking mode. This means that
during tracking, if the line-of-sight between the camera and the Tracking Ring is
obstructed, the camera will return to
HOME
automatically (see pages 15 and 20).
The
HOME
Preset is factory-set for the autoTRACK Camera to be facing straight
ahead (in the direction of the
FRONT
label on the bottom of the camera). This
factory setting can be reset by presenters to accommodate their needs.
Preset 2 and Preset 3
The other two Location Presets can be used to store key presentation areas, such as a map or
other visual aids. These Presets also can be recalled at any time during a videoconference.
To SET or CHANGE Home, Preset 2, or Preset 3:
1. After selecting a Preset, use the
PAN/TILT
arrows to move the camera to the desired
location.
2. Only when desired, use the manual
ZOOM
and
FOCUS
buttons to set the needed zoom
perspective.
3. Only when desired, use the manual
IMAGE
(Iris and Gain) buttons to set the needed
light/dark contrast.
4. Press and hold any of the three
Location Preset
buttons (
HOME
,
PRESET2
, or
PRESET3
)
until you hear two beeps.
To RECALL a Location Preset:
• Press and release the desired
Location Preset
button (
HOME
,
PRESET2
, or
PRESET3
).
The CameraMan moves to the preset location and recalls the information stored.
Pressing any of the
Location Presets
on the Tracking System Keypad disengages
the autoTRACK mode.
To reactivate the autoTRACK mode, simply press any of the four
autoTRACK
View
buttons. The camera goes into the autoFIND mode until you are in the
camera’s line-of-sight. The Camera begins tracking you in the view selected.
Location Presets enable you to make your presentations more effective by incorporating other media, such as maps, flipcharts,
overheads, etc. Using the Presenter Keypad, you can store and recall a PAN/TILT position, ZOOM perspective, and an IMAGE for
each Location Preset.
Step 4
Step 2
Step 1
Step 3
Simultaneously pressing autoTRACK TIGHT and autoTRACK LEFT
buttons, resets the camera to “Factory Default” view settings.
