Page 25
© 1999 ParkerVision, Inc. • Appendices
Front of CameraMan Camera
Appendix A: Troubleshooting
Problem:
The CameraMan autoTRACK Camera will not follow the Tracking
Ring Package.
Solution:
1. Is the
POWER
LED on the CameraMan’s front panel illuminated?
• If it is illuminated, proceed to step #2.
• If it is not illuminated, make sure the Main Docking Station is
plugged in and its
POWER
switch located on the front panel is
moved to the
ON
position. The
POWER
LED on the front of the
Main Docking Station should be illuminated.
2. Is the
TRACKING UNIT STATUS
LED on the camera’s front panel
illuminated?
• If it is
ON
, proceed to step #3.
• If it is
OFF
, make sure the Tracking Ring Power Pack is powered
ON
.
• If it is still
OFF
, check the
Battery LOW
LED on the top of the
Tracking Ring Power Pack. If the
Battery LOW
LED is
illuminated, then the battery is low and needs to be recharged.
• If both the
ON
LED and the
LOW
LED on the top of the Power
Pack are not illuminated, then the battery may be completely
discharged and needs to be fully recharged.
• If the battery is fully charged and the
TRACKING UNIT STATUS
LED is still
OFF
, then verify that the
RF CHANNEL
switch on the
back of the Main Docking Station matches the position of the
RF
CHANNEL
switch on the back of the Tracking Ring Power Pack.
3. Is the
autoTRACK
LED on the camera’s display panel illuminated or
flashing?
• If it is
ON
, proceed to step #4.
• If it is
OFF
, use the Tracking System Keypad to select one of the
four
autoTRACK View
buttons.
4. If the
POWER
and the
TRACKING UNIT STATUS
LEDs are
illuminated, and the
autoTRACK
LED is blinking,
• Check to make sure that the
Tracking Ring Sensors
are
attached properly and are not covered by hair or clothing.
• Be sure that you are standing in the field-of-view of the camera.
If you have any problems with your CameraMan Presenter Camera System, please try to resolve them using the following
information. If you still have questions, then please contact your authorized ParkerVision reseller, or call ParkerVision direct at
(800) 532-8034 or (904) 737-1367.
Step 1:
Is POWER LED
ON?
Step 2:
Is TRACKING
UNIT STATUS
LED ON?
Step 3:
Is autoTRACK LED
FLASHING?
Power ON?
Battery Charged?
RF CHANNEL
RF Switch set to
the same
channel?
Only one (1) Presenter System may be operated in a Line-of-Sight room/area at a given time.
