APPENDIX B
A typical listing for a Pneudri Electronic version 3.3 is shown below.
This file contains all error code strings, the file should be formatted as
follows:
The code string category is indicated by "[]" symbols, this should match one
of the code definitions in the "NOD" file with the same name.
Each string should be preceded by the string's corresponding numeric code.
In most case to suit the local language the text strings should be translated
and the new strings entered.
[ERROR]
0: No error
1: CLEARED-Emergency stop
2: CLEARED-Safety pressure fault
3: CLEARED-High outlet dewpoint warning side A
4: CLEARED-High outlet dewpoint fault side A
5: CLEARED-High outlet dewpoint warning side B
6: CLEARED-High outlet dewpoint fault side B
7: CLEARED-Low inlet pressure warning
8: CLEARED-Low inlet pressure fault
9: CLEARED-High inlet temperature warning
10: CLEARED-High inlet temperature fault
11: CLEARED-Dewpoint probe fault
12: CLEARED-Pressure probe fault
13: CLEARED-Temperature probe fault
14: CLEARED-Contactor fault side A
15: CLEARED-Contactor fault side B
16: CLEARED-Silencer change now due
17: CLEARED-Change inlet AO filter
18: CLEARED-Change inlet AA filter
19: CLEARED-Change outlet AR filter
20: CLEARED-Service now due
21: CLEARED-Drain fault
22: CLEARED-Power failure fault
129: ACTIVE-Emergency stop
130: ACTIVE-Safety pressure fault
131: ACTIVE-High outlet dewpoint warning side A
132: ACTIVE-High outlet dewpoint fault side A
133: ACTIVE-High outlet dewpoint warning side B
134: ACTIVE-High outlet dewpoint fault side B
135: ACTIVE-Low inlet pressure warning
136: ACTIVE-Low inlet pressure fault
29
