manualshive.com logo in svg

Parker HPD2N, Руководство пользователя, Страница: 37 / 125

Поделиться
Скачать
Parker HPD2N Скачать руководство пользователя страница 37

Parker Hannifin S.p.A.  - S.B.C. Division                                               HPD N User’s Manual 

 

34 

BINARY PARAMETERS 
 

Binary parameter Pb40 can be read, written and saved. Binary parameter Pb41 provides 

information regarding system status. Parameters Pb42 and Pb99 are read/write parameters 
with save facility. 
 

b40.0 

Selecting the first or second speed reference full scale value

. Default=0. If set to 0 

Pr2 is used to standardise the analogue reference. If set to 1 parameter Pr3 is used. 

b40.1 

Activation of algorithm for the suppression of vibration at 0 rpm

. Default=0. Set 

to 1 to activate the algorithm. 

b40.2  Selecting user/reserved reference

. If set to 1 the reserved reference is used in 

accordance with the currently active operating mode. If set to zero the reference 
selected by b40.0, b40.12 and b40.13. is employed. Default is 0. 

b40.3 Reference 

freeze

. Default=0. If set to 1 the reference will not be updated so that 

motor will not follow input reference modifications. If set to zero the reference will 
follow variation in the input reference. 

b40.4  Left-hand stroke end

. Default=0. If set to 1 and the selected reference requires 

negative speed, the reference will be forced to zero in accordance with the ramp in 
Pr12. If set to zero no type of control is performed. 

b40.5  Right-hand stroke end

. Default=0. If set to 1 and the selected reference requires 

positive speed, the reference will be forced to zero in accordance with the ramp set in 
Pr12. If set to zero no control Is performed. 

b40.6 Stop 

function

. Default=0. If set to 1 the motor is stopped according to the ramp set 

in Pr12. 

b40.7 

Absolute/relative speed window selection

. Default=0. If set to zero speed windows 

Pr14 Pr15 b41.1 will operate in relative mode, if set to 1 the speed windows will 
operate in absolute mode. 

b40.8  Analogue torque limit

. Default=0. If set to 1, Pr22, i.e. auxiliary analogue input, 

will be used to limit motor torque. 

b40.9 Software 

enable

. Default=1. If set to zero the drive cannot be started. 

b40.10  Low voltage operation enable

. Default=0. If at 1 the inrush current circuit will be 

connected each time the drive is disabled, thus permitting rapid increases in power 
supply voltage. When the drive is started the inrush current circuit will be connected 
before the effective start-up of the power stage. This procedure causes a drive start-
up delay of 120ms. 

b40.11  Analogue output selector

. Default=0. If set to 0 the analogue output will carry a 

signal proportional to motor torque. If set to 1 it carries a value proportional to Pr38. 

b40.12  Digital/analogue reference selector

. Default=0. If set to 0 the analogue input is 

selected as the main reference. If set to 1 the reference will be digital and, by means 
of 40.13, it can be set for internal or external. If set for an external input, using b42.5 
this can be set for quadrature or frequency/direction. 

b40.13  Internal or frequency reference selector

. Default=0. If b40.12=1, b40.13 can be set 

to 0 to select internal reference, or to 1 to select the frequency input (encoder-in) 
which, in turn can be configured as frequency/direction or quadrature signal using 
b42.5. 

Содержание HPD2N






























































































































Отзывы:

Нет отзывов