27
EN
7.7.1 Using the Correct Drive System
The drive system consists of a motor and/or gearbox and is connected to the linear drive in order to move the carriage
linearly along with the mounted payload.
WARNING
Hazard due to over-dimensioned
drive system motor and gearbox.
Severe injuries and damage to property that could even occur
after longer periods of operation.
► Corrected dimensioning of the drive system and matching to linear
drive is necessary.
To ensure that the linear drive is operated within the permissible load limits, the proper arrangement and selection of
the motor system must be carried out by Parker-Hannifin or the operator.
EL-sizing, the software-based design program from Parker-Hannifin, also provides reliable combinations of linear drive
and drive system. The maximum torque on the drive shaft of the linear drive must not be exceeded at any time.
7.7.2 Coupling Housing, Motor Coupling and Flange
WARNING
Shaft breakage due to NON-alignment
Severe injuries and damage to property caused by unbraked
payload.
► Centering of drive shaft and motor shaft/gearbox shaft via coupling
housing and flange.
The drive system, which consists of the motor and/or gearbox, must be properly connected to the drive shaft of the
linear drive. To ensure the shafts are aligned with one another, a tailored combination of a coupling housing, motor
coupling and motor flange (for externally supplied motors/gearboxes as well) must be fitted.
Therefore, it is best if you only use suitable products offered by the manufacturer.
ØD
xE
H7
ØA
45°
Ø4xB
ØFxG
HB
/
H
R
45°
4xB
ØD
xE
ØA
HW
ØF
H7
G
G
ØF
H7
ØF
H7
ØF
H7
G
V
G
H7
Basic
reinforced
Connection dimensions belt - HMRB
Product
Profil
Ø A
B
Ø D
H7
E Ø F
H7
G
GV HW
HMRB08
42
M4
34 2.5
10 13.5 2.5
25
HMRB11
51
M6
39 1.2
12 20.0 0.0
31
HMRB15
72
M8
54 2.1
15 19.3 7.0
45
HMRB18
80
M8
64 4.0
18 21.8 1.5
50
HMRB24
95 M10
80 2.5
24 24.0 4.0
60
Connection dimensions screw drive - HMRS
Product
Profil
ØA
B
ØD
H7
E ØF
H7
G
HB
Basis
HR
verstärkt
HMRS08
42
M4
34 3.0
6
11
26
37.0
HMRS11
51
M6
39 5.0
10
18
32
52.0
HMRS15
72
M8
54 4.0
12
31
36
60.0
HMRS18
80
M8
64 2.5
15
33
44
67.5
HMRS24
95 M10
80 2.5
20
37
55
83.0