22
Modular Electric HMR Linear Drives
HMRS
HMRB
7.5.2 Magnetic Switch Types
7.5.3 Connection Assignment for M8 Connector
The connector assignment complies with DIN EN 50044
3-pin connector assignment
7.5.4 Installation of terminal block and M8 connectors
The IP54 cover must be opened as per section 7.4.1.
Mounting the M8 connectors in the end cap
End switch
E+
End switch
E-
Homing switch
R
Nut
Nut
Connector plate
M8 connector
M8 connector
Plug
End switch
E+
End switch
E-
Homing switch
R
► Remove the
plugs
from the end cap.
► Insert the
M8 connectors
through the hole,
starting from the back of the end cap drive
end side, and secure with
nuts
.
► Solder the respective wire ends
(use the heat shrink tubing).
► Remove the
connector plate
and corresponding
plugs
.
► Fasten the
M8 connector
to the
connector plate
with
the
nuts
.
► Pass the cable through clearance.
► Fasten
connector plate
.
brown (bn)
black (sw)
blue (bl)
brown (bn)
blue (bl)
PIN assignment (top view)
Electrical connection: cable
type RST-K
Reed 2-pole
Closing function
(normally open)
Opening function
(normally closed)
PNP 3-pole
Closing function
(normally open)
Electrical connection: cable
type EST-K
Electrical connection: plug
type RST-S
Reed 2-pole
Typ EST-S
PNP 3-pole
brown (bn)
blue (bl)
brown (bn)
blue (bl)
brown (bn)
black (sw)
blue (bl)