Parker 650S Series, Руководство по эксплуатации продукта

Страница: 53 / 144

6-2
Programming Your Application
650S AC Drive
Programming Your Application
You can program the drive to your specific application. This programming simply involves changing parameter values.
If necessary, there are three parameters for tuning your drive. Refer to PID - Tuning Your Drive, page 6-32.
Saving Your Modifications
When parameter values are modified, the new settings are saved automatically. The drive will retain the new settings during
power-down.
MMI Parameters
This table provides information about each parameter accessible using the keypad, or MMI (Man Machine Interface). For
more information about these and additional parameters accessible using ConfigEd Lite (or other suitable programming tool),
refer to the 650S Software Product Manual on our website: www.SSDdrives.com.
Key to MMI Parameters Table
F
Parameters indicated with
F
are visible with full menus only. Refer to the DETAILED MENUS parameter (
ST
99).
M
Parameters indicated with
M
are Motor Parameters. They are not reset by changing Application using parameter
P
1;
all other parameters are reset to default values.
NOTE
The “Range” for a parameter value is given in the Configurable Parameters Table. Ranges for outputs are
given as “—.xx %”, for example, indicating an indeterminate integer for the value, to two decimal places.