Parker 650S Series, Руководство по эксплуатации продукта

Страница: 35 / 144

4-4
Operating the Drive
650S AC Drive
LOCAL
Local Control Operation
This is the simplest method of operating the drive. Connect the keypad to the drive and power-up the unit. The drive will display
the Local screen. If not, refer to Chapter 5 and select Local Control.
Follow the instructions opposite to start and stop the motor.
Reverse: Instead of setting a negative setpoint, you can reverse the motor
direction by pressing STOP +
T
, or START +
T
.
To change the direction to forwards, (the normal direction), press STOP +
S
or START +
S
.
Note that the Setpoint parameter will not change sign to indicate this
change, however the rotating indicator on the MMI will show the
direction.
We recommend that you use the STOP key commands if the motor is
stopped, and the START key commands if the motor is running. The keys
should be pressed and released together.
Reverse
LOCAL
Press to start the motor
and it will ramp to the setpoint
Press to stop the motor
and it will ramp to zero
Press to apply a small setpoint
(see Reverse below)
From zero, release
and press again for
a negative setpoint