Parker 10G-11-0015 Series, Руководство по эксплуатации продукта

Страница: 44 / 147

8-6
Operation and Simple Running
AC10 Inverter
F800=1 is rotating tuning, F800=2 is stationary tuning. In the mode of rotating
tuning, make sure to disconnect the motor from the load).
iv. Set functional parameters of the inverter:
Function code Values
F111 50.00
F200 0
F201 0
F202 0
F203 0
v. Press the “I” key, to start the inverter;
vi. During running, current frequency of the inverter can be changed by pressing ▲ or
▼;
vii. Press the “O” key once, the motor will decelerate until it stops running;
viii. Switch off the air switch, and power off the inverter.
8.3.2 Setting the frequency using the keypad panel, and starting, forward
and reverse running, and stopping inverter through control
terminals
i. Connect the wires in accordance with
Figure 8-2
. After having checked the wiring
successfully, switch on the air switch, and power on the inverter;
Figure 8-2
Wiring Diagram 2
www.comoso.com