Parker Hiross Hyperchill ICE001, Руководство пользователя

Страница: 13 / 32

11
Hyperchill (ICE001)
English
4 Control
4.1 Control panel
P1 SET key: used to access parameter
programming functions.
P2 UP key: used to increase the value of a
parameter.
P3 DOWN key: used to decrease the value of a
parameter.
S1 On/Off switch: enables pump startup and
activates the control
L1: green Indicates compressor operation
L2: green Not utilised
L3: red Indicates presence of controller alarms
H1: red Indicates the presence of machine alarms.
set
L1 P2 P1 L3
P3 L2
S1
H1
A1
4.2 Starting the chiller
S
Switch on the chiller as follows: press the On/Off [S1] switch
to On.
S
Set the desired temperature on the controller.
4.3 Stopping the chiller
When chiller operation is no longer required, turn the chiller off
as follows: turn the On/Off [S1] switch to Off.
4.4 Parameter settings
General
There are two levels of parameter protection:
a) Direct (F): with immediate access;
b) Password (C): with password controlled access;
4.4.1 Chiller parameters
PARAMETER CODE TYPE DEFAULT
Serial address
H0
C
1
C parameters password PA C 22
4.4.2 Sensor parameters
PARAMETER CODE TYPE DEFAULT
Unit of measurement selection /5
C
0
4.4.3 Regulator parameters
PARAMETER CODE TYPE DEFAULT
Control differential
(hysteresis 0=0.5 ˚ C/ ˚ F).
rd
F
2
4.4.4 Compressor parameters
PARAMETER CODE TYPE DEFAULT
Compressor start delay on ap-
pliance switch on [min.].
C0
C
0
Minimum time period between two
successive compressor start ups
[min.].
C1
C
6
Minimum compressor ’Off’ time
[min.].
C2 C 0
Minimum compressor ’On’ time
[min.].
C3
C
0