16.
Fit and glue the fuselage doublers FD in place as
shown.
17.
Cut two pieces of 3/16” carbon rod so that they stick
out from both sides of the fuselage about 5/8” and
slide them into the fuselage. DO NOT glue them in
place!
18.
Fit and glue F2A to fuselage former F2 as shown, be
careful not to glue F2A to the carbon rod. Sand a
bevel on the top of F2A to match the fuselage sides.
Remove the carbon rod when done.
19.
Fit and glue F3A to fuselage former F3 as shown, be
careful not to glue F3A to the carbon rod. Sand a
bevel on the top of F3A to match the fuselage sides.
Remove the carbon rod when done.
