12.
Cut two pieces of the included balsa triangle 2” long
and epoxy to LG2 and the fuselage sides.
13.
Fit the battery tray assembly to the fuselage sides.
Ensure all parts are fully seated and that the fuselage
sides are straight (no twist) and then glue the battery
tray assembly to the fuselage sides.
14.
Epoxy LG1 to the inside of the fuselage bottom. This
step is a little tricky because you have to work around
a number of other parts, so practice placing LG1
before applying any epoxy.
15.
Cut two pieces of the included balsa triangle 2” long
and epoxy to LG1 and the fuselage sides.
