44.
Sand a bevel in the leading edge LE1 to match ribs R1
& R2.
45.
Fit and glue 1/8” sq. sticks into the slots in the wing
ribs as shown. Slice 1/8” sq. sticks in half between R1
& R2. See step 43 below for clarification.
46.
Slice 1/8” sq. sticks in half between R1 & R2.
47.
Glue the 1/32” ply reinforcing disks to R1 and R2 as
shown. Use the 3/16” carbon rod to assist with
alignment but be careful not to glue the carbon rod to
the ribs.
