Warning
Read and follow these warnings and the instructions that follow. Failure to do so could
result in serious property damage and/or serious bodily injury.
Questions?
- Call
Paragon Pro Manufacturing Solutions
Customer Service at 1-800-448-0822 or 701-775-0551
- 2 -
Worn, damaged or improperly installed chain can fail possibly resulting in serious injury and/or property
damage. INSPECT CHAIN FREQUENTLY. REPLACE WHEN WORN.
Use only genuine PANELLIFT
®
Brand Wallboard Lift replacement parts installed according to manufacturer’s
instructions by qualified personnel.
Only parts listed in the parts index are user serviceable or installable. All other parts require factory service or
installation. Call 800-441-0551 for prompt factory service.
DO NOT tamper with the factory preset hydraulic limits. Adjusting hydraulic limits can expose the PANELLIFT
®
Brand Wallboard Lift to forces for which it is not designed. This may result in failure and serious injury and/or
property damage.
As with any lifting equipment, always WEAR A HARD HAT when operating unit.
The load rating of the PANELLIFT
®
Brand Wallboard Lift is 150 lbs. DO NOT load the unit beyond this limit.
Load only one sheet of wallboard at a time.
DO NOT contact battery terminals with metal components of the PANELLIFT
®
Brand Wallboard Lift. OBSERVE
ALL WARNINGS ON THE BATTERY.
Use only the wiring harness, battery & charger as supplied by the manufacturer. DO NOT REVERSE THE
POLARITY OF THE WIRING HARNESS.
DO NOT operate the PANELLIFT
®
model 460 where combustible gases are present.
DO NOT attempt to use the PANELLIFT
®
Wallboard Lift if any part is missing, damaged, or worn. Order a
replacement part immediately. DO NOT use if telescoping sections have been damaged, bent, heated or
welded. DO NOT weld on unit.
Keep hands, clothing, and hair away from chains and movable telescoping sections.
DO NOT operate unit under the influence of alcohol or other substances which may impair operator judgement.
Use of this equipment shall be limited to authorized personnel who have been trained in the proper techniques
for safe operation and maintenance.