1. FOR INITIAL USE INSTALL THE THREE 8” CASTERS IN
THE TRIPOD BASE AND SECURE WITH BOLTS AND NUTS
PROVIDED.
2. BEGIN BY SETTING UP THE TRIPOD BASE: PRESS DOWN
ON THE SLIDE YOKE PIN CLIP AND SWING THE OUTER LEGS
OUT UNTIL THEY LOCK IN THE WORKING POSITION (NOTE
THE HOLES ON THE BOTTOM OF THE SLIDE TUBE).
3. PLACE THE FRAME ASSEMBLY ON THE TRIPOD BASE.
ASSEMBLY
- 4 -
4. POCKET A SLIDES OVER ANGLE B ALIGN HEX NUT C
WITH HOLE D.
