ASSEMBLY
continued
- 7 -
12. TO EXTEND THE OUTRIGGERS FOR USE, PULL
OUT ON THE OUTRIGGER LOCK PIN WITH YOUR
ONE HAND AND SLIDE THE OUTRIGGER OUT WITH
YOUR OTHER HAND AS SHOWN. THE LOCK PIN
WILL ENGAGE AT THREE DIFFERENT POINTS ON THE
OUTRIGGER: FULLY RETRACTED. EXTENDED 21”. OR
EXTENDED 33”.
MAKE SURE
THAT THE LOCK PINS ARE ENGAGED IN
ONE OF THESE THREE POSITIONS BEFORE LOADING
THE UNIT.
DO NOT
USE THE
PANELLIFT
®
WITH THE
OUTRIGGERS EXTENDED BEYOND THE 33” POINT.
RETRACT THE OUTRIGGERS WHEN STORING OR
TRANSPORTING THE UNIT.
13. THE 460 IS EQUIPPED WITH ITS OWN BUILT IN
CHARGING UNIT. PLUG IN AND LET CHARGE BEFORE
USE OR AFTER USE.
• Connect the battery cable (“A” above) prior to charging.
• Plug in charger (“B” above) to charge battery.
• Green light (“C” above) indicates power to the charger.
• Red light (“D” above indicates battery is charged.
Disconnect battery cable (“A” above) when not in use. Long
periods of non-use can discharge the battery sooner if the
cable remains connected.
A
D
C
B
