Paradyne FrameSaver SLV 9124, Техническое описание

Страница: 169 / 346

Configuration
8-47
9124-A2-GH30-00 June 1999 - Preliminary
H
Delete EDLCI Connections and Make a standard PVC to frame relay link,
DLCI nnnn
If you choose this selection, the following actions occur:
— Removes this DLCI on all PVC Connections (see Table 8-10, PVC
Connection Options ), and Management PVC Connections (see
Table 8-12, Management PVC Options ).
— Resets any Trap Manager Destination (see Table 8-16, SNMP Traps
Options ), or Default Network Destination (see Table 8-11, Node IP
Options ) that is configured for a Management PVC with this DLCI to the
factory default setting.
— Deletes all PVC Connections (see Configuring PVC Connections on
page 8-50) and Management PVC Connections (see Configuring
Management PVCs on page 8-56) involving this DLCI as the source or
primary destination.
— Deletes all excess DLCIs (other than frame relay link, DLCI nnnn) that
were used only in deleted connections.
— Changes DLCI Type from Multiplexed to Standard for the selected
Network DLCI.
— Creates a standard PVC connection between this Network DLCI and
frame relay link, DLCI nnnn (see Configuring PVC Connections on
page 8-50).
H
Leave as Multiplexed DLCI
The DLCI Type remains unchanged. You must delete the DLCI connection
before you can change the DLCI Type.
"
Procedure
To create additional DLCI records:
1. Press Esc to return to the previous DLCI Records screen.
Helpful Hint:
Once you create the first DLCI record, you can use the CopyFrom
function to create additional records, assigning a unique number to each
new DLCI record.
Example:
First DLCI numbered 16
Second DLCI numbered 17
2. Select New, or the CopyFrom function, and press Enter.