Paradyne BitStorm 2400, Руководство пользователя

Страница: 68 / 90

4. Using the Web Interface
4-26
December 2002 2400-A2-GB20-10
Static Multicast Configuration
The Static Multicast option allows you to create or delete static Layer 2 multicast
groups.
Figure 4-16. Static Multicast Configuration
This page allows you to create and delete static multicast groups. You create a
new group by filling in the following fields and then clicking Apply:
To delete a group, select the group from the list box underneath the VID field.
When you do this, the appropriate information is immediately displayed above. To
confirm deletion of the selected group, you must click on Delete.
Field Description
VID VLAN ID. This field indicates the VLAN ID for this group. It is a
decimal number up to four digits long.
MAC Address This field indicates the six-byte MAC Address for this group in
hexadecimal/colon format.
Port Member Status The remaining portion of this row allows you to set the state of a
particular port for this group. There is a string of twelve characters
in this field with each character representing one port on the
switch. The first character represents port one, the second
character represents port two, etc. The character for a specific port
represents the state it is in for this group. By clicking on the
character for a specific port, you can toggle the state for that port.
The following states are defined:
!
–: Not included in group
!
M: Member
!
F: Forbidden