Paradyne BitStorm 2400, Руководство пользователя, Страница: 55 / 90

4. Using the Web Interface
2400-A2-GB20-10 December 2002
4-13
3. Click on Apply to add the new entry.
SNMP Target Parameters Table
This table allows you to set up parameters that a target address in the SNMP
Target Addresses Table needs to use in order to generate a notification. For each
entry in the SNMP Target Addresses Table, you can specify an entry to use in the
SNMP Target Parameters Table.
For example,
nms v1
in the SNMP Target Addresses Table (first entry) has a
value of
v1 params
in its parameters field. Therefore, when the target address
nms v1
generates a notification, it will look for the entry in the SNMP Target
Parameters Table whose name is
v1 params
and use this entry’s information to
generate the correct notification.
Transport Address Transport address whose format is dependent upon domain.
This is the server IP address.
Timeout This is the expected maximum round trip time for
communicating with the target transport address. The time
interval that an application may wait could be longer than this
value if authentication is required. The default value is 1500.
Retry Count Number of retries to be attempted when no response is
received.
Tag List Contains a list of tag values that the notification generator uses
to select this specific target address. The notification generator
scans this value looking for a match from the SNMP Notify
Table. If a match is found, then it sends the notification to this
target address.
Parameters Identifies an entry in the SNMP Target Parameters Table (which
is the second table on this web page) to be used for this target.
The identified entry contains parameters to be used when
generating messages to be sent to this transport address. You
must enter the name of a SNMP Target Parameters row. For
example, in
Figure 4-8, SNMP Targets , there are 3 rows in the
SNMP Target Parameters Table. To specify one of those rows
for this field, you simply enter the name of the desired SNMP
Parameters row, such as
v1 params
,
v2 params
, or
v3 params
.
Storage Type The storage type for this row. The following options are
available:
!
other
!
volatile
!
nonVolatile
!
permanent
!
read-only
Field Description