Paradyne BitStorm 2400, Руководство пользователя

Страница: 32 / 90

3. Using the Asynchronous Terminal Interface
3-4
December 2002 2400-A2-GB20-10
Switch Configuration Screen
The Switch Configuration screen is shown in Figure 3-3 . This screen allows you to
modify key parameters of the BitStorm 2400. Use the Tab or the arrow keys to
move from one field to another. After you modify a field, press Enter to validate it. If
the information in the field is not valid, the previous value will be displayed.
Figure 3-3. Switch Configuration Screen
You can modify the following information:
Field Description
IP Address This is the IP address allocated to the default subnet and default
virtual local area network (VLAN). Factory defaults will have all ports
on the default VLAN; thus, this IP address will be associated with all
ports initially. This IP address is set with the asynchronous terminal
interface.
Subnet Mask This field lets you enter the subnet mask (netmask).
Default Gateway This field lets you enter the address of the gateway (i.e., next hop
router). This will only take effect after the switch is reset. It can be left
as 0.0.0.0 if the switch will not be connected to the external Internet.
MAC Address This is the base Ethernet address of the in-band ports of the
BitStorm 2400.
Spanning Tree Toggle between Disable and Enable using the spacebar. Enabling
this feature starts the Spanning Tree algorithm.
BOOTP Bootstrap Protocol. This protocol allows the switch to discover it’s
own IP address, the IP address of a BOOTP server on the network,
and a file to be loaded into memory. This option is not yet
implemented.