Paradyne BitStorm 2400, Руководство пользователя

Страница: 73 / 90

2400-A2-GB20-10 December 2002
B-1
B
SNMP Traps
Overview
The following tables show supported traps for the BitStorm 2400 and the
associated CO and CPE modems.
Table B-1. SNMP Traps – Shelf Events (1 of 2)
Event Trap Description (Object) MIB
Shelf Reset A request to set eloopShelfReset to
reset(2) has been received on the shelf
unit. eloopShelfResetEvent
Over
low-temperature
condition Event to notify shelf unit temperature is
above the low temperature threshold. It is
an indication/warning that the temperature
is rising for the unit. Temperature range is
0 to 50 degrees Celsius (32 to 122 degrees
Fahrenheit). eloopShelfTempWarning
Over
high-temperature
condition Event to notify shelf unit temperature is
above the high temperature theshold. It
indicates that temperature is very high for
the unit. Temperature range is 0 to 50
degrees Celsius (32 to 122 degrees
Fahrenheit). eloopShelfTempVeryHigh
Fan speed low Event to notify fan speed has dropped
below the theshold for the specific fan on
the shelf unit. RPM threshold is 3,800. eloopShelfFanSpeedLow
Shelf power out of
voltage range Voltage has gone higher or lower than the
required range. Power range is:
!
For AC model: 85 to 265 VAC
autoranging, 47 to 63 Hz
!
For DC model: –40.5 to –72 VDC
eloopShelfPowerRailOutOfSpec
Primary gigabit
ethernet link down Event to notify primary gigabit ethernet link
(GigE1) lost for the shelf unit. eloopShelfGigEWANLossOfSignal
Alternate gigabit
ethernet link down Event to notify alternate gigabit ethernet
link (GigE2) lost for the shelf unit. eloopShelfGigEAltWANLossOfSignal
Download End Event to notify download operation ends for
the shelf. eloopShelfDownLoadEnds