manualshive.com logo in svg

Paradyne 3163, Руководство пользователя

Paradyne 3163 - быстрая справка в виде руководства, которое можно скачать бесплатно с {сайта}. Это подробное руководство поможет вам быстро и легко освоить новый продукт. Не тратьте время на поиск, загрузите его прямо сейчас и начните пользоваться новым устройством без проблем.

Поделиться
Скачать
background image

ACCULINK 3163 DSU/CSU

C-20

March 1999

3163-A2-GB20-10

Table C-8

(2 of 3)

Management Configuration Options

Com Link: PPP
Next     PPP     SLIP     Prev

Com Port Link Layer Protocol. Specifies the link layer protocol for the communication port if the Com Use configuration
option is set to Mgmt.

PPP – Specifies PPP as the link layer protocol for the IP management link on the communication port.

SLIP – Specifies SLIP as the link layer protocol for the IP management link on the communication port. The
communication port must be configured for asynchronous operation to support SLIP.

Modem IP Adr: 
Next     Edit     Clear     Prev

Modem Port IP Address. Specifies the IP address for the modem port if the Modem Use configuration option is set to
Mgmt.

Edit – Allows you to edit or display the IP address for the modem port.

Clear – Allows you to clear the IP address for the modem port. The IP address is set to 000.000.000.000.

Mdm NetMask: 
Next     Edit     Clear     Prev

Subnet Mask for the Modem Port. Specifies the Subnet Mask for the modem port if the Modem Use configuration option
is set to Mgmt.

Edit – Allows you to edit and/or display the Subnet Mask for the modem port.

Clear – Allows you to clear the Subnet Mask for the modem port. The Subnet Mask is set to 000.000.000.000. If the
Subnet Mask is 000.000.000.000, the IP protocol creates a default Subnet Mask based on the class of the IP address
(Class A: 255.000.000.000, Class B: 255.255.000.000, or Class C: 255.255.255.000).

Alt Mdm IP Adr: 
Next     Edit     Clear     Prev

Alternate Modem Port IP Address. Specifies the alternate IP address for the modem port if the Modem Use configuration
option is set to Mgmt. This IP address is needed if a call attempt does not complete on the primary alarm phone number
(contained in the alarm directory) and the alternate dial out directory is used to try another phone number.

Edit – Allows you to edit or display the alternate IP address for the modem port.

Clear – Allows you to clear the alternate IP address for the modem port. The IP address is set to 000.000.000.000.

Alt Mdm NetMask: 
Next     Edit     Clear     Prev

Alternate Subnet Mask for the Modem Port. Specifies the alternate Subnet Mask for the modem port if the Modem Use
configuration option is set to Mgmt. This Subnet Mask is needed if a call attempt does not complete on the primary alarm
phone number (contained in the alarm directory) and the alternate dial-out directory is used to try another phone number.
If this configuration option contains a non-zero Subnet Mask, it is used as the Subnet Mask for the modem port if a call is
completed to the alternate phone number.

Edit – Allows you to edit and/or display the alternate Subnet Mask for the modem port.

Clear – Allows you to clear the alternate Subnet Mask for the modem port. The Subnet Mask is set to 000.000.000.000. If
the Subnet Mask is 000.000.000.000, the IP protocol creates a default Subnet Mask based on the class of the IP address
(Class A: 255.000.000.000, Class B: 255.255.000.000, or Class C: 255.255.255.000).

Содержание 3163




























































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3163

YASKAWA SI-EP3/V Installation Manual preview
SI-EP3/V
Бренд: YASKAWA Страницы: 68
Lindy 25046 User Manual preview
25046
Бренд: Lindy Страницы: 4
Matrix Switch Corporation MSC-5-3232 Product Manual preview
MSC-5-3232
Бренд: Matrix Switch Corporation Страницы: 61
Paradyne Comsphere 3510 User Manual preview
Comsphere 3510
Бренд: Paradyne Страницы: 85
Garland INT40G2SR44 User Manual preview
INT40G2SR44
Бренд: Garland Страницы: 43
Gbord EN-101 User Manual preview
EN-101
Бренд: Gbord Страницы: 8
Buffalo LinkStation Mini User Manual preview
LinkStation Mini
Бренд: Buffalo Страницы: 71
Advantech MIC-730AI User Manual preview
MIC-730AI
Бренд: Advantech Страницы: 36
FabiaTech Low Power Series User Manual preview
Low Power Series
Бренд: FabiaTech Страницы: 77
Cowfish Technologies VanConnect User Manual And Installation Manual preview
VanConnect
Бренд: Cowfish Technologies Страницы: 38
AXAGO PCEU-43R Quick Installation Manual preview
PCEU-43R
Бренд: AXAGO Страницы: 2
Pakedge Device & Software RK-1 Quick Start Manual preview
RK-1
Бренд: Pakedge Device & Software Страницы: 14
ANEP P4GU VoLTE Technical Data Sheet preview
P4GU VoLTE
Бренд: ANEP Страницы: 48
Hama 00176547 Operating Instruction preview
00176547
Бренд: Hama Страницы: 25
Infoblox Infoblox-250 Installation Manual preview
Infoblox-250
Бренд: Infoblox Страницы: 16
Tripp Lite N201-001-BL Specification Sheet preview
N201-001-BL
Бренд: Tripp Lite Страницы: 3
Digital Voice Systems VC-20-MR2 User Manual preview
VC-20-MR2
Бренд: Digital Voice Systems Страницы: 32
Dialogic IP Board IPT10000C Quick Install Card preview
IP Board IPT10000C
Бренд: Dialogic Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды