manualshive.com logo in svg

Paradox MG5050, Руководство по программированию

Пульт управления Paradox MG5050 - удобное и надежное устройство для программирования системы безопасности. Скачайте бесплатное руководство пользователя с подробным описанием программирования на manualshive.com. Просто следуйте шагам из инструкции для настройки вашей системы безопасности на высшем уровне.

Поделиться
Скачать
background image

 Magellan / Spectra SP

59

 

MG5000 PCB Layout

Refer to Single Zone 
Inputs on page 55

Refer to 

AC Power 

& Backup Battery 
Connections on 
page 56.

For the keypad’s zone 
configurations, refer to 
the

 Installer Quick 

Menu

. If EOL is enabled: 

see section 

[706]

 option 

[2]

. Also refer to Keypad 

Zone Connections on 
page 55.

AUX Power 

Refer to transformer requirements on page 56 for Aux. Power 
Output. To connect additional wiring to auxiliary power, use 
the red (+) and black (-) keypad connectors. Auxiliary power 
will shut down if current exceeds 1.1A. If the auxiliary output 
is overloaded and is shut down, you must disconnect all 
loads from the output for at least 10 seconds before 
reconnecting any load back to the auxiliary output.

To provide maximum lightning protection 
we strongly recommend having separate 
earth connections for the dialer and zone 
ground terminals.

To metallic 
enclosure

Ground 
clamp

AWG#14 single 
conductor solid 
copper wire

Cold water 
pipe 
grounding

The "

BELL

" output will shutdown if 

the current exceeds 3A.

Disconnect telephone 
line before servicing.

Four pin connector 
can be used for quick 
installation of a 
keypad.

Do not cut, bend or alter 
the antennas and ensure 
that electrical wires do 
not cross over the 
antennae, as this may 
affect signal reception.

Paradox Memory Key 
(PMC-4 PMC-5)

Antennas

"RX" & “TX” LED:

Flashes quickly when
receiving or transmitting RF signals 
from wireless devices.

"STATUS" LED:

Flash once every second = Normal
Flashes ON 1 second and OFF 1 second = 
Any trouble
Always ON = Panel is using phone line
Fast flash 6 seconds after power up = Installer 
lock enabled 

This equipment must be installed and maintained 
by qualified service personnel only.
For UL and C-UL warnings, refer to the UL and 
C-UL Warnings section at the back of the  
Reference & Installation Manual.

Used for In-Field Firmware upgrade 
through a 307USB Direct Connect 
Interface. See Connecting to 
WinLoad on page 57 for details.

EBUS and Dialer used with:
VDMP3 plug-in voice module for voice reporting
PCS Series GSM communicator module

Press and hold the RESET 
button for five seconds. The 
STATUS LED will start 
flashing. Within 2 seconds of 
this flashing, press the reset 
switch again. The panel will 
reset to default and restart.

The sum of the 
current drawn 
from the BELL 

and AUX must be 
limited to 1.3A (40VA 
transformer strongly 
recommended). 
Exceeding this limit 
will overload the 
panel power supply 
and lead to complete 
system shutdown.

Connection for Self-Contained Bell/Siren

Max. number of keypads = 15 keypads
Max. aux. current = 700 mA
Max. distance of bus module from panel = 76m (250 feet)
Max. total run of wire = 230m (750 feet)

Charge LED: 

Charging and Battery test LED

* If EOL is enabled: see section 

[706]

 option 

[2]

. For the keypad’s 

zone configurations, refer to Installer 
Quick Menu on page 65. Also refer 
to keypad zone connections on 
page 55.

Содержание MG5050









































































Отзывы:

Нет отзывов

Похожие инструкции для MG5050

GE 400 Series Maintenance Manual preview
400 Series
Бренд: GE Страницы: 28
Bartec PSB Design Manual preview
PSB
Бренд: Bartec Страницы: 46
Panasonic DVD-CV36 Quick Manual preview
DVD-CV36
Бренд: Panasonic Страницы: 2
Magnadyne PL50 Installation Manual preview
PL50
Бренд: Magnadyne Страницы: 20
Abus TVIP42562 User Manual preview
TVIP42562
Бренд: Abus Страницы: 353
Abus WIRELESS ALARM SYSTEM User Manual preview
WIRELESS ALARM SYSTEM
Бренд: Abus Страницы: 14
Abus SHSG10000 Installation And Maintenance Manual preview
SHSG10000
Бренд: Abus Страницы: 11
Abus HDCC81000 User Manual preview
HDCC81000
Бренд: Abus Страницы: 110
Abus SECVEST User Manual preview
SECVEST
Бренд: Abus Страницы: 82
Abus PLBW10100 Manual preview
PLBW10100
Бренд: Abus Страницы: 18
Abus PLBW10000 Manual preview
PLBW10000
Бренд: Abus Страницы: 18
Abus PLSG10000 User Manual preview
PLSG10000
Бренд: Abus Страницы: 16
Abus WIRELESS ALARM SYSTEM Installation Instructions Manual preview
WIRELESS ALARM SYSTEM
Бренд: Abus Страницы: 101
Abus PPIC32020 User Manual preview
PPIC32020
Бренд: Abus Страницы: 33
Abus TVHD75500 Quick Manual preview
TVHD75500
Бренд: Abus Страницы: 99
Unipar Sentinel Manual preview
Sentinel
Бренд: Unipar Страницы: 10
Paradox SR230 Installation Manual preview
SR230
Бренд: Paradox Страницы: 2
Paradox SP5500 Quick Setup Manual preview
SP5500
Бренд: Paradox Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды