/ Installation Guide
45
When armed, the PGM will pulse once every 30 seconds.
Option
[6]
OFF= PGM Pulse on any alarm disabled (default)
Option
[6]
ON= PGM Pulse on any alarm enabled
This option sets the PGMs to pulse on any alarm.
Option
[7]
OFF= PGM Pulse on any alarm Partition 1(default)
Option
[7]
ON= PGM Pulse on any alarm Partition 2
Program PGMs to pulse during an alarm for either partition. With this feature enabled, and in combination with the Follow Arm/Stay Arm/Sleep Arm PGM type, the
PGM will mimic the Arm LED.
PGM Programming
Sections
[301]
to
[316]
The programming of the PGMs is accomplished in two steps:
1. Assign the PGMs to the panel.
2. Program the PGMs.
PGM Programming can be executed through the Installer Quick Menu in the
programming guide
.
How Do I Assign PGMs to the Panel?
1.
Press the
[
ENTER
]
key.
2.
Enter your
[
INSTALLER
CODE
]
(default: 0000 / 000000) or
[
MAINTENANCE
CODE
]
(empty by default)
3.
Enter the desired
[
SECTION
NUMBER
]
(from sections
[301]
to
[316]
).
4.
Enter the 6-digit
[
SERIAL
NUMBER
]
of the PGM.
How Do I Delete Assigned PGMs?
1.
Press the
[
ENTER
]
key.
2.
Enter your
[
INSTALLER
CODE
]
(default: 0000 / 000000) or
[
MAINTENANCE
CODE
]
(default 1111/111111)
3.
Enter the desired
[
SECTION
NUMBER
]
(from sections
[301]
to
[316]
).
4.
Press the
[0]
key six times to clear the serial number.
