PARADOX INSIGHT HD77, Руководство по установке

Страница: 58 / 68

58
(vi) Select
Enter
.
(vii) Enter the user name and password .
The LAN General Setup window opens.
Note:
• If you do not know the user name and password, browse to the site
www.routerpasswords.com
and select your router manufacturer and model. The default
user name and password should be listed
• Many routers’ IP address is 192.168.1.1
3. Enable DHCP : Check the Enable Server radio button in the DHCP Server Configuration pane.
Note:
If DHCP is not enabled, verify that the IP address range is large enough to accommodate all of HD77
cameras. Four HD77 cameras require 4 IP addresses.
Figure 2 – LAN General Setup Window
c. Record one address at the upper end of the DHCP range for each HD77 in your system.
4. Set up port forwarding for the IP address:
a. Select the Port Forwarding section (also known as “port mapping”, "NAT", (network address transla-
tion), or “port redirection”) in the router’s configuration page.
b. Select an available port above #50000 on the router and assign it to the HD77 camera.
Figure 3 – Port Forwarding Window