PARADOX INSIGHT HD77, Руководство по установке

Страница: 13 / 68

13 Mounting the HD77
Mounting the HD77 Camera on a Swivel Bracket attached to the Wall
5. Secure the swivel housing to the wall plate: Snap the bracket assembly to the wall plate by placing it on
top of the wall plate and sliding it down until it locks.
Figure 2.8 – Attaching the Swivel Mount to the Wall
6. Determine the HD77 camera angle of view and secure the angle by attaching the angle bracket (6) to the
adaptor plate and inserting a pan head screw #6-32 through the angle bracket and adaptor plate,
attaching them to the swivel hinge.
Figure 2.9 – Angle Bracket
7. Remove the HD77 camera front cover:
a. Unlock the HD77 at the bottom of the HD77 camera with a screwdriver.
b. Pry the front cover apart from the back plate starting from the bottom.
Figure 2.10 – HD77 Camera Lock
Note:
Record the serial number (found on the inner side of the front cover) and location of the of the HD77
camera to identify it by its serial number and to add its location and label details in the BabyWare
application (see
Labeling HD77 Cameras and their Locations on page 24
).
8. Run the cable(s) through the wiring slot in the HD77 camera back plate (7).