PARADOX INSIGHT HD77, Руководство по установке

Страница: 15 / 68

15 Mounting the HD77
Mounting the HD77 Camera on a Wall or Corner
12. Connect the wires to the EVOHD panel and router (if not already connected).
Note:
Ensure that the metal box and EVOHD panel are connected to a valid ground connection.
13. Power up the system: Connecting the power lines from the 16V AC transformer to a power outlet.
The LED3 indicator flashes blue until the boot-up process is complete (boot-up can take up to 3 minutes).
14. Adjust the angle of the swivel bracket to suit requirements and secure the angle adjustment screw.
Figure 2.13 – Angle Adjustment Screw
15. Close the lock (see Figure 2.10 on page 13). The installer diagnostic LEDs switch- off.
2.4.4.1 Adjusting the HD77 Camera Angle
Adjust the HD77 camera angle to suit requirements.
To adjust the HD77 camera angle:
1. Open the lock (see Figure 2.10 on page 13).
2. Loosen the angle bracket screw (see Figure 2.13 on page 15).
3. Adjust the HD77 camera angle as required.
4. Tighten the screw.
5. Replace the front cover.
2.4.5 Mounting the HD77 Camera on a Wall or Corner
To mount the HD77 camera directly on a wall or corner:
1. Separate the front from the back plate of the HD77 camera:
a. Open the lock mechanism at the bottom of the device.
b. Pry the cover off from the bottom of the unit.