PARADOX INSIGHT HD77 Скачать руководство пользователя

Страница: 55 / 68

Appendix D Certifications

The following table displays the certifications applicable to the HD77 camera.

FCC and Industry Canada Compliance Statement

This device complies with FCC Rules Part 15 and with Industry Canada license exempt RSS standard(s).

Operation is subject to two conditions:

This device may not cause harmful interference

This device must accept any interference that may be received or that may cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de

licence. L'exploitation est autorisée aux deux conditions suivantes :

l'appareil ne doit pas produire de brouillage, et

l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

Table 1: Certifications

Mark

Area/Country

Level/Grade/Class

European Economic Area (EEA)

WEEE

EN 50131-2-2 Grade 2

Environmental Class II

Certification Body: Applica Test

and Certification

Содержание HD77





































































Результаты поиска

Содержание HD77

Отзывы:

Похожие инструкции для HD77

Бренды по названию

Популярные бренды

PARADOX INSIGHT HD77, Руководство по установке

Результаты поиска

Содержание HD77

Отзывы:

Похожие инструкции для HD77

Бренды по названию

Популярные бренды