Paradise Datacom Quantum, Инструкция по установке и эксплуатации

Страница: 12 / 354

Quantum and Evolution Series Installation and Operating Handbook
5-1
Chapter 5 Installation
5.1 Unpacking
Prior to unpacking, inspect the exterior of the shipping container for any sign of damage
during transit. If damage is evident, contact the carrier immediately and submit a damage
report.
Carefully unpack all items, taking care not to discard packing materials, particularly the
molded foam inserts. Should the unit need to be returned to Paradise Datacom then you
should use the original packing carton as it is designed to provide the necessary level of
protection during shipment.
5.2 Visual Inspection
Once unpacked, visually inspect the contents to ensure all parts are present and that
there are no signs of damage.
5.3 Getting Started
If the unit is to be rack mounted then adequate ventilation and cooling should be provided.
This must include leaving adequate clearance around the ventilation holes on the sides and
the fan on the back panel.
Connect the appropriate cables to the Transmit IF and Receive IF connectors at the rear of
the unit. Output power level can be controlled using the front-panel menus. The optimum
input level for the demodulator is –45dBm ± 15dB.
5.4 Power Up
Power the unit and wait for it to complete its nitialization when it will display summary
status information.
For local use, from the front-panel menu, select
Main, Edit, All
to define all parameters
prior to operation.
It is also possible to set up the unit from a web browser (this is described in Section 7.4).
When setting up a number of units, it may be preferable to save the configuration settings
of one unit and then transfer them to each of the others – this procedure is explained in
Section 7.4.3.
Getting started is covered in more detail in the separate Evolution/Quantum Modem
Quick Start Guide (application note EVO_AN_009).