PAP Team FLY100, Руководство пользователя

Страница: 18 / 40

The control of the reed valve can be effected
after 25 hours of use therefore at the same
time of the carburetor cleaning. It will be
enough to get off the plate that contains the
reed valve and to check that the petals are
not broken or splintery. The substitution of the
petals is suggested at about 100 hours of use.
When the substitution will be done, watch out
for to position of the petals that will have
to be adherent to the surface of support. We
also recommend every 100 hours to replace
the gaskets of the reed valve that become stiff after time in contact with the fuel.
6.3
REED VALVE
(Pic. 6.3)
We advise to replace all the gaskets of tight after 100 hours of use of the motor:
gasket cylinder, carburetor, reed valve and silencer. Equally the o-ring: exhaust,
cylinder head.In the case the motor is not used for long period, we suggest to
verify the situation of the gaskets in contact with the gasoline and if necessary
to replace them.
6.4
GASKETS
The substitution of the soundproofing material of the silencer is recommended
every 25 hours of operation. Once replaced the soundproofing material you will
find again the same noise that the engine had when the motor was new. Separate
the silencer from the exhaust pipe, proceed getting off first the band of support
in steel, then the 2 nuts that unite the silencer to the muffler. Now remove the two
rivets that fix the silencer.
6.5
SILENCER
(Pic. 6.2)
Manteinance. 18
MANUEL D´UTILISATION