X - R i t e e X a c t 2
1
Consult this documentation in all cases where the Attention symbol
appears.
This symbol is used to inform you of any potential HAZARD or actions that may require your attention.
CE Declaration
Hereby, X-Rite, Inc. declares that the objects of the declaration described below are in conformity with
the relevant Union harmonization legislation including Directive(s) 2014/53/EU (RED), 2014/30/EU
(EMC), 2014/35/EU (LVD), and RoHS EU 2015/863.
Description / Intended Use
eXact 2: CL B Peripheral Spectrophotometer w/ WLAN
eXact 2 Docking Station: WPT Wireless Charger for eXact 2.
Article 3.2: Applied Radio
Spectrum Standard(s)
eXact 2: ETSI EN 300 328 V2.2.2 - module (ATWILC1000-MR110PB)
eXact 2 Docking Station: ETSI EN 300 330 V2.1.1 / 303 417 V1.1.1
Article 3.1(b): Applied EMC
Standard(s)
EN 61326-1 : 2013, EN 55011 :2016, A1 :2017, A11 :2020
EN 301 489-1 V2.1.1, EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.0
Article 3.1(a): Applied Health
and Safety Standard(s)
EN 62368-1 : 2014 / AC : 2015 / A11 : 2017
EN 62311 : 2008, EN 62233 : 2008
EN 61010-1:2010/A1 :2019 (Edition 3.1), IEC/EN 62471
Frequency band(s) in which
the radio equipment operates
eXact 2: 2400 – 2483.5 MHz
eXact 2 Docking Station: 119 – 140 kHz
Maximum radio-frequency
power transmitted
eXact 2: 19.6 dBm (ATWILC1000-MR110PB)
eXact 2 Docking Station: H-field (10m): 10.0 dBuA/m
USA
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
―
Reorient or relocate the receiving antenna.
―
Increase the separation between the equipment and receiver.
―
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
―
Consult the dealer or an experienced radio/TV technician for help.
47 CFR § 2.1077 Compliance Information Unique Identifier:
eXact 2, eXact 2 Docking Station
Responsible Party - U.S. Contact Information:
X-Rite, Inc., 4300 44th Street SE, Grand Rapids, Michigan 49512
USA
Models with Wi-Fi: FCC ID: LSV-EXACT2
CANADA
CAN ICES-003 (B) I NM8-003 (B)
Models with Wi-Fi: IC: 20894-EXACT2
USA CANADA NOTICE
: This device complies with Part 15 of the FCC Rules and with Industry Canada license-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received, including interference that may
cause undesired operation.
Содержание X-Rite eXact 2
Страница 1: ...User Guide ...
Страница 2: ......
