LE 5002 Non Invasive Blood Pressure Meter
USER MANUAL
3
2. MAINTENANCE
WARNING: Failure to follow the instructions in this section may
cause equipment fault.
•
PRESS KEYS SOFTLY – Lightly pressing the keys is sufficient to activate them.
•
Equipments do not require being disinfected, but cleaned for removing urine, faeces
and odour. To do so, we recommend using a wet cloth or paper with soap (which has
no strong odour). NEVER USE ABRASIVE PRODUCTS OR DISSOLVENTS.
•
NEVER pour water or liquids on the equipment.
•
Once you have finished using the equipment turn it off with the main switch. Clean
and check the equipment so that it is in optimal condition for its next use.
•
The user is only authorised to replace fuses with the specified type when necessary.
Figure 1. Power inlet, main switch and fuse holder.
FUSE REPLACEMENT OR VOLTAGE SETTING CHANGE
In case of an over-voltage or other incident in the AC net making it impossible to turn
on the equipment, or if the equipment voltage setting is incorrect, check fuses according
to the following procedure.
1 Remove power cord from the power inlet.
SWITCH
FUSE-HOLDER
OPENING FLANGE