LE 5002 Non Invasive Blood Pressure Meter
USER MANUAL
25
•
After a short delay, a valve opens, slowly decreasing the cuff pressure.
•
The pressure value (the current value of which is shown under the DIA label on
the digital display) will go down until the pulse level reaches its initial level
again. At this time, the diastolic pressure is reached, and the current diastolic
pressure value will be kept under the DIA label on the digital display. The mean
blood pressure is then calculated (as stated in the Introduction to this manual)
and its value shown under the MED label on the digital display.
•
If a new animal is going to be studied, connect its tail cuff and transducer to the
instrument or, if a scanner is available, select the animal number using the
scanner selector. Repeat this procedure as of step 7. Alternatively, new trials
with the same animal can be performed.
