BA_PH_690-100_EN_10-22.docx
67
16.16
Swivel-Away Device for the Cross Slide
For some operations it may be necessary to remove the cross slide. For this purpose, the optional swivel-away
device available under Art. No. 4770 is a useful aid.
16.16.1
Attaching the swivel arm to the cross slide
•
Lock slide table (
W
) in middle position.
•
Set the cross-cut fence (
L
) on the left-hand side to 90°.
•
Move the movable support widening (
5
) all the way to the left.
For the next steps, stand on the left side to the end of the slide table.
•
Pull the swivel arm (
1
) under the cross slide (
Q
).
•
Insert swivel arm support bolt (
2
) into the holding plate (
4
)
of the cross slide (
Q
). Then clamp with the clamping lever (
3
).
Figure 78: Position and mount swivel arm
•
Loosen the clamping lever (
H
) and pull the cross slide (
Q
) forwards
→
The cross slide is now only supported
by the swivel away arm (
1
) and the telescopic swivel arm (
S
).
•
Turn the cross slide (
Q
) by 90° to the right. Then swivel it backward to bring it into its final parking position
behind the slide table (see
Figure 79 and
Figure 79: Swivel away cross slide
Figure 80: Final parking position
16.16.2
Reattaching the Cross Slide
•
The cross slide is attached in the reverse order.
•
If the swivel-away device is not used, it should be folded up at the machine stand.
H
L
5
2
1
Q
W
1
2
4
3
S
H
W
Q
W
P
